12V 125AH Terminal Ngarep Telecom Baterei asam timbal
Aplikasi
➢ Peralatan Kontrol Telekomunikasi
➢ Sistem UPS, Inverter
➢ Peralatan Daya
➢ Surya & Angin
➢ Sistem Daya Darurat
Fitur Umum
✓ Teknologi AGM majeng, lan operasi bebas Pangopènan;
✓ Terminal akses ngarep kanthi jembar standar kanggo rak ETSI 19 "lan 23";
✓ wadhah ABS tahan geni;
✓ Umur layanan ngambang dawa 10 taun;
✓ Low self discharge <3%.
STANDAR sing dituruti
IEC 60896-21/22
JIS C8704
YD/T799
BS6290 bagean 4
GB/T 19638
CE
Ukuran & Bobot
| dawa (mm) | 552±1 |
| Jembar (mm) | 110±1 |
| Dhuwur (mm) | 239±1 |
| Dhuwur Total (mm) | 239±1 |
| Bobot (kg) | 38,0±3% |
Spesifikasi Teknis
| Tegangan nominal | 12V (6 sel per unit) | |||
| Desain Ngambang Urip @25℃ | 10 Taun | |||
| Nominal Capacity @25℃(10 hour rate@12.5A,10.8V) | 125Ah | |||
| Kapasitas @25 ℃ | Tingkat 20 jam (6.63A, 10.8V) tingkat 5 jam (22.0A, 10.5V) 1 jam tarif (79.8A, 9.6V) | 132.6Ah110.0Ah 79,8 ah | ||
| Rintangan internal | Baterei Diisi Daya Penuh @ 25 ℃ | ≤4.8mΩ | ||
| Suhu sekitar | Discharge ChargeStorage | -15 ℃ ~ 45 ℃ -15 ℃ ~ 45 ℃ -15 ℃ ~ 45 ℃ | ||
| Max.Discharge Saiki@25 ℃ | 750A(5s) | |||
| Kapasitas kena pengaruh Suhu (10 jam) | 40 ℃ 25 ℃ 0 ℃ -15 ℃ | 105%100% 85% 65% | ||
| Self-Discharge@25 ℃ saben Wulan | 3% | |||
| Ngisi daya (Tegangan Konstan) @25 ℃ | Gunakake siyaga | Arus Pengisian Awal Kurang saka 31A Tegangan 13.6-13.8V | ||
| Gunakake Siklus | Arus Pengisian Awal Kurang saka 31AVoltage 14.4-14.9V | |||
Tabel Discharge Baterei
Discharge Arus Konstan saben Sel (Amperes ing 25°C)
| FV / Wektu | 10 min | 15 min | 30 min | 45 min | 1h | 2h | 3h | 5h | 8h | 10h | 20h |
| 1.60V | 290.6 | 225.6 | 135.4 | 100.6 | 79.8 | 46.9 | 34.5 | 23.3 | 15.9 | 13.1 | 6.94 |
| 1.65V | 268.9 | 213.1 | 130.9 | 96.8 | 77.4 | 45.4 | 33.4 | 22.9 | 15.8 | 12.9 | 6.88 |
| 1.70V | 249.4 | 200.1 | 127.3 | 93.3 | 74.4 | 44.1 | 32.5 | 22.4 | 15.5 | 12.8 | 6.80 |
| 1.75V | 232.9 | 187.5 | 120.6 | 89.1 | 71.4 | 43.0 | 31.8 | 22.0 | 15.3 | 12.6 | 6.74 |
| 1.80V | 209.5 | 175.9 | 116.4 | 85.9 | 68.9 | 41.4 | 30.8 | 21.5 | 15.0 | 12.5 | 6.63 |
Discharge Konstan Daya saben Sel (Watts ing 25°C)
| FV / Wektu | 10 min | 15 min | 30 min | 45 min | 1h | 2h | 3h | 5h | 8h | 10h | 20h |
| 1.60V | 522.8 | 431.4 | 263.9 | 191.1 | 153.0 | 88.9 | 65.9 | 44.9 | 31.0 | 25.6 | 13.4 |
| 1.65V | 489.3 | 412.8 | 252.4 | 184.6 | 148.9 | 86.5 | 64.1 | 44.1 | 30.8 | 25.4 | 13.3 |
| 1.70V | 458.1 | 384.6 | 242.0 | 178.8 | 143.8 | 84.5 | 62.6 | 43.5 | 30.4 | 25.1 | 13.1 |
| 1.75V | 431.1 | 360.9 | 230.4 | 171.6 | 138.5 | 82.5 | 61.4 | 42.9 | 30.0 | 24.9 | 13.0 |
| 1.80V | 390.3 | 338.8 | 221.0 | 165.9 | 134.0 | 79.8 | 59.6 | 42.0 | 29.6 | 24.8 | 12.9 |
Cathetan: Data ing ndhuwur minangka nilai rata-rata, lan bisa dipikolehi sajrone 3 siklus pangisian daya/discharge.Iki dudu nilai minimal.Desain / spesifikasi sel lan baterei tundhuk modifikasi tanpa kabar.Hubungi CSBattery kanggo informasi paling anyar.
Konstruksi baterei
| Komponen | Plate positif | Plat negatif | Wadhah & Tutup | Katup safety | Terminal | Pamisah | Elektrolit | Pilar segara |
| Fitur | Kandel dhuwur Sn kurang Ca kothak karo tempel khusus | Kothak Pb-Ca sing seimbang kanggo rekombinasi efisiensi | Tahan geni ABS (UL94-V0 opsional) | Flame Si-Rubber lan tahan tuwa | Sisipan Tembaga Wanita M6 (torsi: 3~4N.m | AGM majeng separator kanggo desain sel tekanan dhuwur | Dilute asam sulfat kemurnian dhuwur | Segel resin epoksi rong lapisan |
